Removing sticker on car body

[Paul_N]

is it the same as a window sticker, just need heat??

[Kelvin]

not alot since its paint. just let it sit in the sun

[Yogi]

or go to a Snow auto body and get some 3m General Adhesive Remover and it'll take it off

[AeroSS_87]

or go to a Snow auto body and get some 3m General Adhesive Remover and it'll take it off

best chemical EVER

[Yogi]

It seriously is

[Paul_N]

will it hurt the paint?

[David]

no.

otherwise sit in the sun for 20mins or so then use your finger. flip car around and repeat.

[C.J.]

razor blades

[matt]

I used to do this daily when I was detailing cars,
just get a heat gun or a hair dryer, and get it alittle worm, then use your nails to slowly peel it back, and move the heat gun in front of where you are pulling and it should come off smoothly, or boil a pot of water, and pour it onto the sticker.
THEN get some adheasive remover and clean up the gummy **** thats left if any

[C.J.]

I used to do this daily when I was detailing cars,
just get a heat gun or a hair dryer, and get it alittle worm, then use your nails to slowly peel it back, and move the heat gun in front of where you are pulling and it should come off smoothly, or boil a pot of water, and pour it onto the sticker.
THEN get some adheasive remover and clean up the gummy **** thats left if any

if i would have been serious with my answer i would have said what you just said

i still think razor blades are a viable option.

[David]

razor blades and paint make me nervous... just my .02 on it..

[Lepa]

$10 says CJ wouldnt let a razor blade within 20 feet of his old SS

[BossRoss]

plastic razor blades is what i've always used

[C.J.]

$10 says CJ wouldnt let a razor blade within 20 feet of his old SS

more like $10000000

b/c i was joking

btw i suggest rusty razor blades for just about everything