80'427's junk

[swaggy853]

You say your camarrow is junk. I'm running a 240k $73 accord motor can you top that?

$150 run and drive accord(240k miles) - $77 check from junkyard for the rest of the car = $73 engine

[Hillbilly]

Nope I got about 15k or so in the whole pile as it sits I would guess. Every thing I have has about 2 times its value in speed parts and drivetrain. But its all still junk. Cheap does not equal junk. Junk is all stock parts and **** other people pass over.

[swaggy853]

so a 240k mile accord engine isnt junk? The car came from a field and ended up in the junkyard I mean come on....

[Hillbilly]

I guess what I mean is some junk is cheap and some not. Mine wasn't cheap but its still junk. I built 2 engines for a circle track class, I keep telling the driver they are junk. He gets pissed off cause they are 5 times the engines he used to build but they are still scat crank, 2 bolt, **** scat rod, low compression, iron headed, junk.

[swaggy853]

and a stock accord motor is less impressive than that.

my junk < your junk

[rsisbetter]

240k doesnt make it junk, just well seasoned

[rsisbetter]

btw: i look forward to giving you a run this summer somtime shaggy

[swaggy853]

240k doesnt make it junk, just well seasoned

If you would have seen the 2 inches of grease, oil, and dirt that it took me a few hours to get off, and the car it came out of, you would know its junk. Although its holding up to 8k rpms now and then, not so bad considering the stock redline is like 6200.

[swaggy853]

btw: i look forward to giving you a run this summer somtime shaggy

Uhhh, in what??? before or after new motor+boost?

[AeroSS_87]

he's building a 612 merlin bb and planting it into his cavalier we're converting to a tube frame rear drive 4-link setup. betch watch out..

[swaggy853]

um, ya, cause that happens.
















Except not.

[AeroSS_87]

http://www.knfilters.com/images/press/folk2.jpg

[swaggy853]

I'm willing to bet that there is nothing on that car that is original to a cavalier.

[AeroSS_87]

point?

[swaggy853]

he's building a 612 merlin bb and planting it into his cavalier we're converting to a tube frame rear drive 4-link setup. betch watch out..

um, ya, cause that happens.

Except not.

I stand by my statement.

[AeroSS_87]

keep standing, cuz it's happening. we plasma cut the whole ass end out just last night. The S&W race cars 4-link and 12-bolt welded rear housing are almost ready to drop in whenever QA1 hurries the **** up and ships the suspension

[swaggy853]

I'll believe this when I see it.

[AeroSS_87]

start believing. we'll be done in about 45 days.

[swaggy853]

Speaking of which, whens ricky gonna get his **** fixed?

[AeroSS_87]

here's a spy pic.. we starting tearing out the front half of the interior a couple days ago... it's 100% shelled now.

http://img253.imageshack.us/img253/2165/p3310026sh5.jpg

[AeroSS_87]

Speaking of which, whens ricky gonna get his **** fixed?

The world may never know... he likes to go into hibernation when his **** is down. I'm thinking he'll pop up shortly though..

[swaggy853]

I see a motorized shoulderbelt buckle in the top left of that pic, what year of cavalier came equipped with those again?

[AeroSS_87]

Only his... it was a very rare, special order option that he had to contact other car manufacturs to acquire.

[swaggy853]

right.

[rsisbetter]

btw: i look forward to giving you a run this summer somtime shaggy

Uhhh, in what??? before or after new motor+boost?


uhh, what do you mean, in what?

"new" motor + boost or not, i dont care what you have when we do

[swaggy853]

lets do this, Im open til 6 im being worthless and not going to class today.

[rsisbetter]

what?

[swaggy853]

right now, lets go.

[STOK5OH]

ya come on cody you don't need a floor to race! :lol:

[Hillbilly]

I'll go, lets go. Friday ****s be there or be square.

[rsisbetter]

btw: i look forward to giving you a run this summer somtime shaggy


:joe:

[Hillbilly]

Lets go friday.

[STOK5OH]

come over to the hangar friday,we're puttin a tunnel ram and duel edelbrocks on the mustang. Gonna be wicked fast prolly burn the Mcreary's for a block or two cant wait to get a posi track man this thing is gonna be fast like a roadrunner oh crap i forgot to get my chrome skull valve stem caps back off of my moms vandura before it got impounded **** **** my dads gonna be pissed and not let me borrow his lemans saturday for the party at the moon tower. :(

[supercrackerbox]

This thread just reminded me . . .

It's past March now.

Where the **** is Turbobert?

[STOK5OH]

ADAM HAS AIDS AGAIN!!!!!!!!! NEEEEEEEENER NEEEEEEEEEEEENER!

[supercrackerbox]

Damn cold medicine. Fixed.

[STOK5OH]

you fixed your medicine? wtf kinda pocket lint you smokin kid?

[supercrackerbox]

Mr. Brownstone.

[Hillbilly]

I gonna put on the gold moroso valve covers and the 4" carb spacers on my dual 4 barrel intake. I need to reset the dual point mallory dist. You think 2 600 edelbrock carbs are too much for a 305? Sorry about your valve caps I lost my skull shifter knob that way. I need to get my tassel out of my other camaro to complete the look. Anyone know how much air pressure is too much for a air shocks? Don't you just love the sound of glass packs, mine exit in front of the wheels. My dads was gonna let me borrow the pinto wagon but since I got a c in math he said I couldn't use it.

[Lepa]

**** my truck came with glasspacks from the factory, u guys got nothin on that ****.

[DarkSlide]

And stacks. /thread

[Hillbilly]

told you my **** was junk and you got to see it first hand.

[Lepa]

true it is junk, looks good at night though.

[Hillbilly]

And moving. I call it a 50 50 car 50' away leaving at 50mph.

[swaggy853]

told you my **** was junk and you got to see it first hand.

Yeah, and you never looked at my motor. You would have been like "what am I looking for" and I would have said "exactly."