TurboB18C1DC2
26th March 2008, 03:13 AM
you guys know the car so ill post up whats new
to date is what i have purchased and what i have in my possession
1) b18c1 laskey racing/benson short block:
* Pauter b18c1 connecting rods
* CP 84 mm pistons 9:1 static compression
* Darton/Benson Sleeves
* ITR Oil Pump
* Arp Headstuds
* Golden Eagle/Honda 84mm headgasket
* Crankcase Evacuation/Breather Kit
2) b18c1 head
* New honda oem valve seals
* ITR valves
* Supertech Dual Valve springs
* Supertech Ti Retainers
* 96 spec ITR Cams
3) Other accessories
* Full race ram horn mani
* 3 in downpipe
* JG intake mani
* t04e 60 trim .60 ar compressor, .63 ar exhaust
* T04R/GT40 turbo aka t67 on the compressor side but probaby wont use
* Dual Walboro setup
* Competition Clutch Twin Disk
Still need:
1) Tial 38mm wastegate but should have in my hands by the end of the week
2) Either 1000cc or 1600cc injectors and if i get 1600s ill need an fjo injector driver
3) Neptune RTP
4) Water pump and timing belt
5) Probably will end up selling the 57 trim and 60trim i have and try to get a GT4088 or maybe a t3/t67 non high output
6) Traction Bars
7) Quaife LSD
8) Axles and maybe hubs
some other little things. dont have a digicam but some of you guys have seen it. pretty similar setup to wills. different rods, bigger bore, smaller turbo at this time but hope to get something different, will also have different engine management, also hope to have axles and lsd so i can do what will couldnt.
here is a video of the car at dynosport with new engine turbo setup:
http://www.youtube.com/watch?v=eBGIQ7ZuuiU
to date is what i have purchased and what i have in my possession
1) b18c1 laskey racing/benson short block:
* Pauter b18c1 connecting rods
* CP 84 mm pistons 9:1 static compression
* Darton/Benson Sleeves
* ITR Oil Pump
* Arp Headstuds
* Golden Eagle/Honda 84mm headgasket
* Crankcase Evacuation/Breather Kit
2) b18c1 head
* New honda oem valve seals
* ITR valves
* Supertech Dual Valve springs
* Supertech Ti Retainers
* 96 spec ITR Cams
3) Other accessories
* Full race ram horn mani
* 3 in downpipe
* JG intake mani
* t04e 60 trim .60 ar compressor, .63 ar exhaust
* T04R/GT40 turbo aka t67 on the compressor side but probaby wont use
* Dual Walboro setup
* Competition Clutch Twin Disk
Still need:
1) Tial 38mm wastegate but should have in my hands by the end of the week
2) Either 1000cc or 1600cc injectors and if i get 1600s ill need an fjo injector driver
3) Neptune RTP
4) Water pump and timing belt
5) Probably will end up selling the 57 trim and 60trim i have and try to get a GT4088 or maybe a t3/t67 non high output
6) Traction Bars
7) Quaife LSD
8) Axles and maybe hubs
some other little things. dont have a digicam but some of you guys have seen it. pretty similar setup to wills. different rods, bigger bore, smaller turbo at this time but hope to get something different, will also have different engine management, also hope to have axles and lsd so i can do what will couldnt.
here is a video of the car at dynosport with new engine turbo setup:
http://www.youtube.com/watch?v=eBGIQ7ZuuiU