PDA

View Full Version : beans vs me


Kelvin
16th March 2008, 12:18 AM
well i finally kind of figured out my lean issue, so i ran beans to see what would happen. pretty much even off the line, mid way through 3rd he let off and had about a car on me. i have:

e316g - 19psi tial wastegate/ss o2 housing recirc
stock piping/ic/bov
3in open dp
aeromotive fpr-50psi
550s
stock ecu
act2600/fidanza flywheel

getting right around 10.5-11.5AFR. top of 3rd right at 12.0AFR. didnt data log so i dont know what i was getting for knock. also base timing....no idea rofl.

cole
16th March 2008, 06:09 AM
****IN IDIOTS!

turbodaytona87
16th March 2008, 08:50 AM
dang, what's beans running again?

Kelvin
16th March 2008, 10:43 AM
i will let him post his mods. i dont know for sure.

Thunder
16th March 2008, 11:08 AM
i <3 kelvins exhaust lol

96speedZ28
16th March 2008, 11:44 AM
sounds like a v8 at idle haha

Kelvin
16th March 2008, 12:23 PM
tire fire supervisor

Beans
16th March 2008, 12:48 PM
When you leaving we need to race again and hopefully I can go easier on my clutch and then it wont slip so much. My car just has a fpr mani, front mount, 2.5 exhaust after down pipe to cat-back, free mods, manual boost controller set at 10 psi and creeps to 15 in top of 2nd and then the rest of the gears, and finally a stock slipping clutch which lead me to end in the middle of third becuase it wouldn't grab worth a ****.

Thunder
16th March 2008, 12:51 PM
look out in vids pics, i'll post up video