axles

[Hillbilly]

http://omaha.craigslist.org/pts/2788267473.html

http://omaha.craigslist.org/pts/2824343543.html

http://omaha.craigslist.org/cto/2820187817.html

[96speedZ28]

i'd be interested in those 3/4 axles if my klx would sell

[Kelvin]

that last one is the one i was talking to marty about. apparently its been beat to **** according to some guys i work with. DONT DO IT

[Hillbilly]

You mean beat to **** like marty's k30? Takes a licking and keeps on ticking.

[Hillbilly]

http://topeka.craigslist.org/pts/2822839979.html

http://topeka.craigslist.org/pts/2822846142.html

http://ksu.craigslist.org/pts/2764798342.html

[slownova]

I'd sell my k30 for 2200 with a Dana 60,14ff and a 292 with sm465/205. :) no box

[Hillbilly]

What gears? I will give you what you paid and you keep the service box

[slownova]

We both know it's worth more then that. Exp if that dudes expecting 2,000 for that beater. I really don't want the service box lol.

[Hillbilly]

He is wanting that much but is see he isn't getting it. We are in a depression, the value of things is going down. Better get out while you can.

[slownova]

The best president ever told me the economy is turning around so naturally I'm holding out. I'll sell it with 3/4 axles for what I paid.

[HINZ28]

As of tonight I have to find a new place to work on my trucks or I'd be all over those....

[Hillbilly]

Why? Posted via Mobile Device

[HINZ28]

I've always used my stall at Williamsons to work on my trucks. I was told that is no longer allowed by my so called boss. I will be heaving a nice talk with the GM tomorrow morning

[82355]

i'd be interested in those 3/4 axles if my klx would sell

That's a lot of money for 3/4 ton axles. At that point you would be better off spending a little more and getting one tons.

Martin

[Hillbilly]

i'd be interested in those 3/4 axles if my klx would sell

That's a lot of money for 3/4 ton axles. At that point you would be better off spending a little more and getting one tons.

Martin

Marty is most likely right. You could find a engineless tree line truck for that price.

[96speedZ28]

Thanks for the heads up. It seemed about right cause I see 60's for around $1000. If you can give me a better deal on some 3/4 axles i'd be all over that.

When it does sell, i'll most likely be buying 3/4 axles, a front lift kit, shackle flip for rear, and brake lines. Maybe zero rates.

[96speedZ28]

**** that means ill need wheels and tires also :lol:

[82355]

8 lug steel wheels are cheap. There was a set of 15" wagon wheels on Craigslist the other day.

Martin

[sn95.0]

There is a 4 speed 80's 3/4 ton 4x4 truck on GI craigslist for $800 today.

[96speedZ28]

There is a 4 speed 80's 3/4 ton 4x4 truck on GI craigslist for $800 today.

That kind of makes me want to cry.

http://grandisland.craigslist.org/cto/2830498586.html

[HINZ28]

There is a 4 speed 80's 3/4 ton 4x4 truck on GI craigslist for $800 today.

Link?

[sn95.0]

Chris just posted it.

[sn95.0]

Buy it for $600. Take motor trans axles and scrap the rest for $300. Sell motor and boom free axles and trans/transfer case.

[Hillbilly]

Sell me the transfer case for $150.

[Hillbilly]

Oh it is a 85, 208, forget it.

[Hillbilly]

Talk this guy down 400 or so.

http://grandisland.craigslist.org/cto/2830401641.html

[82355]

I see nothing???

Martin

[82355]

$950? hahahahaha

Martin

[sn95.0]

There is a 4 speed 80's 3/4 ton 4x4 truck on GI craigslist for $800 today.

That kind of makes me want to cry.

http://grandisland.craigslist.org/cto/2830498586.html

This one Marty.

[C.J.]

Talk this guy down 400 or so.

http://grandisland.craigslist.org/cto/2830401641.html

This guy is ****ing high.

[HINZ28]

There is a 4 speed 80's 3/4 ton 4x4 truck on GI craigslist for $800 today.

That kind of makes me want to cry.

http://grandisland.craigslist.org/cto/2830498586.html

This one Marty.

Has been deleted

[82355]

That's why I said I see nothing.

Martin

[sn95.0]

That's why I said I see nothing.

Martin

It was a 85 K20 350 4 speed for $800.

[Kelvin]

http://grandisland.craigslist.org/cto/2783355112.html

[Hillbilly]

http://grandisland.craigslist.org/cto/2783355112.html

Numbers matching

[HINZ28]

People think Craigslist is the opportunity get top dollar out of anything...crazy ****s

[96speedZ28]

http://grandisland.craigslist.org/cto/2783355112.html

I wonder if the emo chick comes with? Should email and ask for nudes.

[82355]

....and then tell him his pickup is worth nothing more than iron price. It could (very doubtful) be an SM465/NP203 though.

Martin

[slownova]

My k30 looks better and better with every post.

[Hillbilly]

Ok Brian, I will give you $200 more than you paid for it.

[slownova]

How much is that?

[Hillbilly]

Pretty sure I can go look up our discussion on FB and find out.

[82355]

For every link they put up with a ridiculous price that only an idiot would pay, I can tell you about a cheap set one of us have bought.

Martin

[96speedZ28]

http://lincoln.craigslist.org/pts/2782959313.html

Should I?

[slownova]

Pretty sure I can go look up our discussion on FB and find out.

You offered me that much before lol. I'm holding out for more, Or ill paint it and try and flip it to someone.

[Hillbilly]

Not too bad.

[HINZ28]

Quick question did all the 14 bolt rears have 10.5" ring gear?

[HINZ28]

I fingerd it out. Only full floaters right? semi floaters have 9.5" ring gear....Correct?

[Hillbilly]

I fingerd it out. Only full floaters right? semi floaters have 9.5" ring gear....Correct?

Yes that is correct. The 9.5 isn't bad if you get it free.

[HINZ28]

I fingerd it out. Only full floaters right? semi floaters have 9.5" ring gear....Correct?

Yes that is correct. The 9.5 isn't bad if you get it free.

Free as in package deal/full price for a dana 60? Free does not exist in 2012

I realize you guys have had some hell of good deals but whats the top dollar you would pay for a gm Dana 60 front?

[Hillbilly]

I paid a grand. Posted via Mobile Device

[sn95.0]

For a 60 that came with a complete running truck that you drove home 3 hours.

[HINZ28]

9.5" semi floaters arnt worth **** is what your saying?

[HINZ28]

For a 60 that came with a complete running truck that you drove home 3 hours.

^This is what im looking for

:lol: The truck was just a bonus

[slownova]

I have a 80 k30.

[HINZ28]

So ive heard....PM me what you would take for it? you must have got some crazy good price on it if john wants it so bad lol

[sn95.0]

Are you talking about the yellow state truck with work box on it?

[slownova]

Yup. See the Facebook pic?

[sn95.0]

Yes, that thing is sweet. Just needs a regular box on it.

[slownova]

Yea I'm looking for one. It was actually special ordered by oppd at huber chevy here in Omaha. Can't be many that color.

[Hillbilly]

I will take it is. Posted via Mobile Device

[slownova]

What?

[Hillbilly]

I will buy it with the service box just like it is. Posted via Mobile Device

[slownova]

Come up a couple hundred more.

[Hillbilly]

So 1200? Posted via Mobile Device

[slownova]

Haha. That's less then I paid.

[Hillbilly]

Oh, well this a depression. Posted via Mobile Device

[slownova]

Isn't

[Hillbilly]

Is so! Posted via Mobile Device

[82355]

http://lincoln.craigslist.org/pts/2782959313.html

Should I?

Depends what axles they are. If it's a full floater rear, than sure. If it's a semi floater, it's not much of an upgrade. As far as front 3/4 ton axle. The early Dana 44's have desirable flat top knuckles, but weaker external hubs. The later Dana 44's have the less desirable knuckles, but they don't make the axle any weaker, and they have the stronger internal hubs. A GM 10 bolt is the equivalent of a late Dana 44.

Martin

[Hillbilly]

Isn't

So again this is a: Stock 1980 custom deluxe, K30, manual (sm465), 205, reg cab, heat only, 292 in custom yellow, with a service box? Gears?

[slownova]

Tag says 4.10 I'm pretty sure. Everything else is correct to the best of my knowlage. Has blue seat and the dash looks like your typical 1980 does. The hood has a kink in it also like they get. It's basically rust free minus surface In a couple spots.

[Hillbilly]

Heat only? 292 right?

[slownova]

Yes and yes.

[Hillbilly]

Hmmm. What happened to "I am swapping it all in my 70 K20"?

[slownova]

69 k20. I still will unless someone wants it more then me. Or I'll just use the Dana 44/60 in it to.

[Hillbilly]

I don't really "need" it.

[slownova]

But you "want" it.

[Hillbilly]

Yes but you "need" more money for it than I "want" to pay.

[slownova]

There's always that part.

[slownova]

Both trucks are now for sale.

[Hillbilly]

Link to ads?

[slownova]

Going to be making them thru out the week. I'm selling mostly all I got.

[Hillbilly]

What happened? You get bumped to the top of the list on the sex change waiting list?

[slownova]

The doctors really are amazing people. They can make it look like they never did anything. I've been waiting so long and now is my time!!!

[Hillbilly]

Well I still kinda want the K30 but I am not willing to put as much as you would like toward your retirement, so tell me if you have trouble getting rid of it.

[slownova]

What's to much? Make me a realistic offer.

[Hillbilly]

Just trade me for my k10 straight across.

[slownova]

Never seen. Trying to sell not gain more!!

[Hillbilly]

I need to thin not gain. Better count me out.

[HINZ28]

Latest find is a set of 3/4s. 44/14 with 4.09s. None locking hubs on the 44. Complete pull outs What are they worth?

[Hillbilly]

Idk. $350 or so.

[82355]

$350 would be on the high side. You'll have to add more to that for lock outs to install them. Internal or external hubs?

Martin

[Hillbilly]

Remind me to stop posting because no matter what I say I am always wrong even if I said the same thing as Marty.

[schovil69]

Remind me to stop posting because no matter what I say I am always wrong even if I said the same thing as Marty.

Okay

[HINZ28]

$350 would be on the high side. You'll have to add more to that for lock outs to install them. Internal or external hubs?

Martin

Guess I'm not sure. Out of a 76. How hard is it to instal lock out hubs anyways?

[Hillbilly]

easy. Not sure what style 76 is but I would guess external.

[sn95.0]

Come with me to Albion when I pick up those trucks and buy the set of 3/4 ton axles Marty has.

[HINZ28]

I probably should just do that. Marty do you still want to sell them? 4:10s correct? Pm me or call me if easier 402 450 7499

[regal403]

easy. Not sure what style 76 is but I would guess external.

Stop posting, because no matter what you say, you are always wrong, even if you said the same thing as Marty.

[Hillbilly]

Point taken

[82355]

Like?

Martin

[82355]

Remind me to stop posting because no matter what I say I am always wrong even if I said the same thing as Marty.

Do you not agree with what I said? They may be worth $350, but I wouldn't pay anymore than that, and I would try to jew them down from that a bit. I am also a cheap ass. The no lockouts automatically adds another $100 or so that you will have to spend on the axles to make them work. I don't know if you can get cheap external hub lock outs. That is another reason they should be cheaper, and would be a handy bit of information for him to have, to try and get the price lowered. Sorry that hurt your little bitty feelings John.

Martin

[HINZ28]

He wanted 300. Was gona shoot for 250. Think I'd rather come take that 44 out if you wanna sell them?

[82355]

I sold the one set to Jerry Klassen for a pivot truck. I am not quite sure what gears are in the last set I have under a truck. I could pull a cover I suppose.

Martin

[Hillbilly]

I would stay away from the external hub if possible.

[HINZ28]

I sold the one set to Jerry Klassen for a pivot truck. I am not quite sure what gears are in the last set I have under a truck. I could pull a cover I suppose.

Martin

If you wanna find out. I'm definitely interested with cash in hand.

[82355]

Well they are under a mostly complete truck that I have to strip. I don't want to strip the axles unless I have the time to completely strip the pickup. This Sunday could possibly work. Let me find out.

Martin