newbie GUNNER

[GUNNER]

:ohnoes:hey everyone my name is brandon, i own a 64 ford fairlane with a 347 stroker that i built, i havent dynoed it yet but roughly around 485-500 at the crank, i hope but to the tires like 385 to 400, not bad,
ok my motor:
stock block, .040 over
forged scat crank
forged cat h-beam rods
keith black pistons flat tops
mellings oil flow oil pump and milodon deep sump oil pan and pick up
arp main studs
total seal rings
rousch 200 cast iron heads 2.02/1.60 port matched to victor jr.
bigger valve springs with 140 seat pressure
manley valves
comp cams pro magnum rockers
trick flow chrome moly push rods 7.00
lunati voodoo hydraulic flat tappet cam 578/574 at 264
stewart components stage 3 water pump
750 demon an 8 lines
crane cams distrubitor and ignitions all photo cell
lightening bolt headers 1 3/4 primaries and 3 1/2 collectors
3 inch exhaust with flowmasters and dumps

[Cobra Commander]

i own a 64 ford fairlane with a 347 stroker that i built, i havent dynoed it yet but roughly around 485-500 at the crank, i hope but to the tires like 385 to 400, not bad,

Welcome. I love '64 Fairlanes.

I'll be that guy, and say that I doubt it is much over 300 wheel since your car couldn't pull on my 304whp Cobra from a roll last year on the way to Culvers. :dunno:

[schovil69]

Welcome

[MadmaX]

until dyno is completed, you have 200hp.

I have spoken.

[Cobra Commander]

lol

[LastPewterZ]

:ohnoes:hey everyone my name is brandon, i own a 64 ford fairlane with a 347 stroker that i built, i havent dynoed it yet but roughly around 485-500 at the crank, i hope but to the tires like 385 to 400, not bad,


ROFLROFLROFLROFLROFLROFLROFLROFLROFL

[Thunder]

if you want a baseline, you can run me if i want. low 14 car.

[blk97z28]

Welcome you know Aaron.

[2gtalon]

welcome

[blk97z28]

Welcome Brandon!!:)woot

[MadmaX]

if you want a baseline, you can run me if i want. low 14 sec driver.

corrected.

[ADV1]

Welcome, we needed some more old school **** on here...

[Andy]

hello

[Mr. Jeff]

until dyno is completed, you have 200hp.

I have spoken.

:Thumb:

[Thunder]

if you want a baseline, you can run me if i want. low 14 sec driver.

corrected.

yep i can't drive to save my life.

[MadmaX]

well, mostly I just saw an opportunity to poke fun. :P

[GUNNER]

well when i was pulled on by that cobra last year it wasnt completely done and i topped out, it is only made to go a quarter mile, but i do want a different car tho my car is to heavy and i cant afford to put disk brakes on it , i want to put my motor in a litle fox body and that will be a lot better.

[GUNNER]

i raced kevs mullet camaro a couple months ago i lost by 4 so right now i am right around low 13 to high 12, but i need to buy a new stall cuz my current one isnt stalling like it is pose to

[GUNNER]

but my car is done this this year i have to do motor work, larry at car quest machine shop messed u my head when he put a new valve in it so i keep breaking off arp rocker studs at the poli lock. any suggestions to what it could be? i am lost to what it could be because it takes a lot to bust off a stud

[Cobra Commander]

well when i was pulled on by that cobra last year it wasnt completely done and i topped out, it is only made to go a quarter mile

It ran plenty hard for a 4 door.

I was after a 64 hardtop for years when I was younger, but I was only able to come across 2 door posts for a decent price. I love them for some reason.

[LastPewterZ]

i raced kevs mullet camaro a couple months ago i lost by 4 so right now i am right around low 13 to high 12, but i need to buy a new stall cuz my current one isnt stalling like it is pose to

Wanna race me?

[GTPpower]

Welcome! My dad would love your car. He drove a 65 LTD in highschool, so he'd just go nuts over yours.

[GUNNER]

i would race but i have major engine problems now it keeps snaping off the rocker stud off at the poli lock the same one everytime. so i have to pull the head.

[GUNNER]

everybody ussaully loves my car it is pretty fast i just wish i had a different chassis to put the motor in so i could be faster. its a lot of car to get moving but the motor will do it. i dont hook with out slicks, i can go 2 to 3 blocks sideways trying to get traction. it is crazy cuz it is not out of control loose but my car is sideways

[STOK5OH]

you really should make sure u have the right pushrods,like i said before.

[dunnster76]

He should really make sure his spelling/grammar is correct before posting ... it's hard reading what he's trying to say.

[C.J.]

looks like he wont be on LSS for awhile

http://journalstar.com/articles/2007/11/07/news/local/doc473214882cf79269916933.txt

[2gtalon]

:hitwithrock:

[redsled]

What a ***.

[Fyrtruck]

****ing douche bag....BAN BAN BAN BAN!!!!

[Chevelle7D2]

piece of ****.

[SHIFTER]

Ban this piece of ****.

[BOORAH]

:Hammer::hitwithrock::jail::guillotine::plzdie2: :gtfo2: :teabag::bdsm::whipsex:


Thats all.

[00dakotav8]

Finally the police did something good!! I wonder who it was he took all that **** from...

[BOORAH]

Me.

[smoksho]

I hope he gets out of jail soon. Cause when i get back iam going to kick his little ****ing ass for calling my car a mullet ride. I let it slide wit most people but not this ****ing tool bag. I beat him by 4 cars on engine and got out of it, way before the end of a quarter. Prob a high 13 maybe.