More fmic pics (engine bay)

[DSMMIKE]

MMMM GOLD!!!!!!!
http://i37.photobucket.com/albums/e73/MikeMarnik/fmic001.jpg

Hmmmm that looks close to the exhaust
http://i37.photobucket.com/albums/e73/MikeMarnik/fmic002.jpg

Yup it sure is. (im going to wrap it with exhaust wrap along with probally the first foot or so of the downpipe)
http://i37.photobucket.com/albums/e73/MikeMarnik/fmic003.jpg

Man it looks like that bov sticks up a bit high
http://i37.photobucket.com/albums/e73/MikeMarnik/fmic004.jpg

Yup sure does (slightly hits the hood im having The Shop Inc re weld it flush to the pipe on friday along with having them weld on another bracket to the fmic to hold it in place THE SHOP INC FTMFW)
http://i37.photobucket.com/albums/e73/MikeMarnik/bovflange.gif

MMMMM all hard piping now, IM BALLIN!!
http://i37.photobucket.com/albums/e73/MikeMarnik/fmic005.jpg

so im trying to decide if i should wrap all of the ic piping with heat wrap or just do the one pipe off the turbo near the exahust.
Then if i dont wrap it all should i leave it bare aluminum or have it powder coated gold or black.

[toom1h]

haha looks good, and you're right. looks alittle close to that exhaust

[toom1h]

o and, atleast wrapping it around that pipe thats close to the exhaust, it wouldnt look too bad black or gold imo.

[Ervin]

Short route piping. I'm jelous :(

[DSMMIKE]

Short route piping. I'm jelous :(

the only way to go my friend long route ftl.

[Ervin]

tru, tru

[schovil69]

**** powder coating. Have that **** polished. BLING BLING!!!

[DSMMIKE]

**** powder coating. Have that **** polished. BLING BLING!!!

meh im not so much for the super shiny bling bling. granted i have a gold valve cover but its more tastefuly and helluva lot easier to keep looking good than something polished

[schovil69]

Well, if you change ur mind, let me know. It's what I do.

[CrazyPete]

looks fine the way it is do you have an ex. leak or what ive never seen anyone with a burn on there pipe like that

[Lepa]

definately an exhaust leak but i'd still wrap it for shits n giggles.

[DSMMIKE]

looks fine the way it is do you have an ex. leak or what ive never seen anyone with a burn on there pipe like that

ya thats some soot or w/e from an exhasut leak i need to get a new gasket in there just havent had the time to go pick one up

[CrazyPete]

looks like you got enough colors under your hood as it is i say leave it alone

[Cobra Commander]

So why is the piping hitting in two different places? Bad motor mounts, or is the kit just just a hair off on measurement or something?

[DSMMIKE]

So why is the piping hitting in two different places? Bad motor mounts, or is the kit just just a hair off on measurement or something?

its only hitting on the bov the rest is in great placement and the motor mounts are prothan motion control insters so def not bad. and the bov hitting is a lame ass fab up from the person who designed it and didnt wanna do any sort of difficult weld so he put a 1in pipe inbetween the flange and bov which is getting fixed tomorrow

[JesterMX6]

its still a dsm. lame

[Andy]

Tubing Everywhere:eek:

[DSMMIKE]

looks like you got enough colors under your hood as it is i say leave it alone

well removing silver/aluminum color would eliminate one color and if i end up pcing my ic pipes im gonna get black couplers becuase blue just doesnt fit anywhere

[CrazyPete]

i'll warn ya now the powder coating will scratch and you'll be pissed when it does

[2gtalon]

now all you need is your old turbo fixed

[Lepa]

now all you need is a 3582

[Kelvin]

hows the 14b holding up

[DSMMIKE]

hows the 14b holding up

very nice i shouldnt be running alot of boost though if i want it to hold up till i can afford a real turbo though huh

[DSMMIKE]

now all you need is your old turbo fixed

that turbo will never spool again the compressor and exhaust wheels hit their housing and ruined the wheels thus its more expensive to fix than buy a new one. i will be saving my pennies for many months to get a baller ass set up. all i will say is $1200 minimum

[JustinGSX]

Just get them painted by a car painter, it's what I did and it has held up great, even the hot side.