View Full Version : F body rear 2.
f108jetmech
31st August 2008, 03:26 PM
So now I have 2:73's in my car, I need my computer reprogrammed. Tried calling Dynosport, but no reply for a couple days. Just wondering if I could get this done soon from someone with the software.
David
31st August 2008, 04:06 PM
Did you leave a message or email him?
If you can't get ahold of dan at dynosport you can call The Shop.
f108jetmech
31st August 2008, 04:36 PM
Left him a voicemail. If I can't get a hold of him tues. I'll call the shop. Thanks.
cole
1st September 2008, 06:10 AM
2.73s....i'm sorry
David
1st September 2008, 09:33 AM
sometimes it's easier to drive down there and see if hte shop is open.
Thunder
1st September 2008, 09:53 AM
well the shop has regular hours unlike dan. So you would be able to get ahold of them between 9-5 I wanna say? Not to mention chad posts regularly (4sfed). You could always PM him.
David
1st September 2008, 09:57 AM
very true.
f108jetmech
1st September 2008, 01:21 PM
2.73s....i'm sorry
Yea, going from 4:10's to 2:73's is a huge difference. It's a dog off the line. It's only temporary though. Just a month or 2. I might not even get the computer reflashed.
cole
2nd September 2008, 07:59 PM
i had an auto lt1 with factory 2.73's, they got swapped out
Z28
11th September 2008, 11:40 AM
most people don't know that a stall will solve your gear problems.
i've seen stalled 2.73s get off the line as well as a car with 3.73s with the same size stall
the only place gears hurt you is out of the hole, the stall takes care of that
the gears CAN make a difference, but if you have a stall already, it's not much of a diff.
f108jetmech
17th September 2008, 08:31 PM
It's a 6 speed.
David
17th September 2008, 09:23 PM
quit making excuses.
95Banshee
17th September 2008, 10:21 PM
most people don't know that a stall will solve your gear problems.
i've seen stalled 2.73s get off the line as well as a car with 3.73s with the same size stall
the only place gears hurt you is out of the hole, the stall takes care of that
the gears CAN make a difference, but if you have a stall already, it's not much of a diff.
what the **** noob. that is total bs. video or it never happened.
SteveB4C
20th November 2008, 07:17 PM
Have you check you speed-o with the road side radars. What kind of gas mileage did you get with the 4.10s
HINZ28
20th November 2008, 08:38 PM
It's a 6 speed.
doesnt have 2:73's then unless its a different rear end, all 6 speed have 3:42's
DSMMIKE
20th November 2008, 08:43 PM
It's a 6 speed.
doesnt have 2:73's then unless its a different rear end, all 6 speed have 3:42's
he swapped out rears u tard thats what this whole thread is about
82355
25th November 2008, 09:19 AM
most people don't know that a stall will solve your gear problems.
i've seen stalled 2.73s get off the line as well as a car with 3.73s with the same size stall
the only place gears hurt you is out of the hole, the stall takes care of that
the gears CAN make a difference, but if you have a stall already, it's not much of a diff.
You are so right! That is why all drag cars run 2.42's!!!
Martin
f108jetmech
25th November 2008, 09:33 AM
Have you check you speed-o with the road side radars. What kind of gas mileage did you get with the 4.10s
Not great. I never took it on a long trip to see what highway mileage might be. Around town n stuff I got 14-16MPG. I already got the 2:73's swapped out for 3:90's.
vBulletin® v3.7.2, Copyright ©2000-2012, Jelsoft Enterprises Ltd.